| Home  | About ScienceAsia  | Publication charge  | Advertise with us  | Subscription for printed version  | Contact us  
Editorial Board
Journal Policy
Instructions for Authors
Online submission
Author Login
Reviewer Login
Volume 47 Number 5
Volume 47 Number 4
Volume 47S Number 1
Volume 47 Number 3
Volume 47 Number 2
Volume 47 Number 1
Earlier issues
Volume 47 Number 4 Volume 47 Number 5

previous article next article

Research articles

ScienceAsia 47 (2021): 585-593 |doi: 10.2306/scienceasia1513-1874.2021.074


Synthesis and characterization of low-density porous Ni 0.55Zn0.25Cu0.20Fe2O4 (NZCFO) by sol-gel auto-combustion method


Qiushan Yua,b, Yuchang Sua,*, Rabigul Tursuna, Zhongbao Luoa, Jing Zhanga

 
ABSTRACT:     Ni-Zn-Cu ferrite plays an important role in soft magnetic material applications due to its excellent magnetic properties, but its high bulk density hinders its practical use. Therefore, some low-density porous Ni-Zn-Cu ferrite powders were prepared by a sol-gel auto-combustion method using metal nitrates and citric acid as raw materials to solve the problem. The microstructure, morphology, magnetic properties, and microwave absorption performance of the ferrite were studied by TG-DSC, XRD, SEM, BET, FT-IR, VSM, and Vector Network Analyzer. The results revealed that the xerogels formed from nitrate and citric acid could undergo auto-combustion in air under the external conditions, and the release of heat and gas during the process can promote the formation of a multi-layered internal cavity structure in the ferrite to yield only a half bulk density of the general ferrite. The purity, morphology, grain size, and saturation magnetization of Ni0.55Zn0.25Cu0.20Fe2O4 could be controlled by heat treatments at different temperatures and durations. The synthesized Ni0.55Zn0.25Cu0.20Fe2O4 had excellent soft magnetic properties, low-density, and good microwave absorption properties, which make it an excellent microwave absorbing material with great promising practical application.

Download PDF

17 Downloads 102 Views


a School of Materials Science and Engineering, Central South University, Changsha 410083 China
b School of Physics and Optoelectronic Engineering, Yangtze University, Jingzhou 430023 China

* Corresponding author, E-mail: emlink@csu.edu.cn

Received 24 Jan 2021, Accepted 14 Jun 2021