| Home  | About ScienceAsia  | Publication charge  | Advertise with us  | Subscription for printed version  | Contact us  
Editorial Board
Journal Policy
Instructions for Authors
Online submission
Author Login
Reviewer Login
Volume 50 Number 5
Volume 50 Number 4
Volume 50 Number 3
Volume 50 Number 2
Volume 50 Number 1
Volume 49 Number 6
Earlier issues
Volume  Number 

previous article next article

Research articles

ScienceAsia (): 178-182 |doi: 10.2306/scienceasia1513-1874...178


A model for predicting the specific heat capacity of fly-ash concrete


Pongsak Choktaweekarna,*, Warangkana Saengsoyb, Somnuk Tangtermsirikulb

 
ABSTRACT:     This study is aimed at investigating the specific heat of fly-ash concrete. The experiments were conducted to obtain the specific heat of fly-ash cement pastes and mortars. Mortars were prepared by varying the sand type and content. It was found that the specific heat decreases as the amount of free water content decreases. The replacement of cement by fly ash resulted in high specific heat at young age but it tends to decrease in the long term due to the pozzolanic reaction. Mortars had lower specific heat than cement pastes. We propose a model for predicting the specific heat of concrete as a function of time, material, and mix proportion. The model, which was verified with various experimental results, simulated the trend of specific heat quite well.

Download PDF

41 Downloads 1473 Views


a School of Civil Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Thailand
b Construction and Maintenance Technology Research Centre, Sirindhorn International Institute of Technology, Thammasat University, Thailand

* Corresponding author, E-mail: pongsak@siit.tu.ac.th

Received 26 Jun 2008, Accepted 23 Mar 2009