| Home  | About ScienceAsia  | Publication charge  | Advertise with us  | Subscription for printed version  | Contact us  
Editorial Board
Journal Policy
Instructions for Authors
Online submission
Author Login
Reviewer Login
Volume 50 Number 1
Volume 49 Number 6
Volume 49 Number 5
Volume 49S Number 1
Volume 49 Number 4
Volume 49 Number 3
Earlier issues
Volume  Number 

previous article next article

Research articles

ScienceAsia 47 (2021): 187-194 |doi: 10.2306/scienceasia1513-1874.2021.022


Synthesis and kinetics of tributyl citrate using aluminum dihydrogen tripolyphosphate supported on modified activated carbon as catalyst


Aiqun Yuan*, Hui Liang, Zengwei Huang, Dongping Wei

 
ABSTRACT:     The mechanism of synthesis process of tributyl citrate using aluminum dihydrogen tripolyphosphate supported on modified activated carbon as a catalyst was investigated by gas chromatography-mass spectrometry, and the kinetic equation was also studied. The results showed that the influence of internal diffusions was eliminated with the particle size smaller than 180 ?m, but the influence of external diffusions was eliminated with the stirring speed higher than 450 r/min. The yield of 97% for tributyl citrate was achieved under the the following optimized condition: 1:4.2 of acid to alcohol, 8% of dosage of catalyst accounting for total reaction amount, 5 h of reaction time for water segregating and refluxing, and 150 ?C of reaction temperature. The apparent reaction activation energy was E a = 61.4 KJ/mol. The mechanism of this catalytic reaction was considered to be attributable to the fact that the steps of the esterification of citrate to produce both monobutyl citrate and dibutyl citrate were very fast, but the rate of the formation of tributyl citrate was slow. The control step of total reaction was the reaction between dibutyl citrate and n-butanol to produce tributyl citrate.

Download PDF

171 Downloads 902 Views


a School of Chemistry and Chemical Engineering, Guangxi University for Nationalities, Guangxi Key Laboratory of Chemistry and Engineering of Forest Products, Nanning 530006 China

* Corresponding author, E-mail: aiqunyuan1999@sina.com

Received 10 Nov 2020, Accepted 9 Jan 2021